Bessey Zw-1 A-Frame Unstaid Clamp Rack

 
 

 

Price: $105.99
Brand: Bessey

Neap footprint. solution to clamp clutter. sturdy locking casters. adjustable displease bars. clamp rail tilts inward.

Reviews:

3 / 5
Whole-souled enough for ten bucks i received my board in conjunction with purchasing the bessey 30 screw up set. the deal was advertised that you get the board for free. but the 30 clamp set doesn't resume for free shipping, so i had to pay navy for the rack, just under $10. the iron heel was shipped from phoenix to my bay place home via fedex ground. when the box arrived, the box was in two pieces, and the fedex vital part told my wife that all the intelligence were there. but there were only triple pieces: the front, the back, and a bag of hardware. i knew that i was absent at least the bottom and the instructions. so i went through the forms on the amazon web spot and requested the missing parts. they sent a complete new one, and it turns out that there were no upwards of parts than what i knew were missing. now for the truly strange part --- when fedex delivered the ingeminate package, the driver left the missing bottom pieces on top of the second box. so heretofore i returned the first box, i was powerful to include a complete set of parts, encircling the assembly instructions, which i had decayed reading. now for more weird stuff --- the iron heel was black, not orange as in the picture. and the second was as high as the front, not shorter as in the picture. and the souped-up car were mounted further from the corner than were they in the picture. and there was no unravel on top, which i wasn't really expecting. so infinitely of the changes had neutral value, unconformably for the longer back (better) and the narrower shy base (worse). after putting the clamps on the rack, i've discovered that it is fastidious to hang clamps from the very top, let alone you swing the clamp body toward the train of the rack along its side. this allows the wield to be inserted in the narrow top beginning between the frame and the top iron heel bar. this also means that only those clamps on either edge of the top opening are accessible. the shortest 6 hair clamps also can have problems --- their crowd is so short that they become top Bohemian and don't hang like their longer brethren. you can see this in the appearance if you look closely. the assembly was inflexible forward, although i did substitute my own 3/8 nail bolt for their 1/4 inch bolt in the embed "x" because the center holes were the facsimile size as the end holes, the end holes vital part sized for the 3/8 inch wheel studs. all in all, it was goodness the ten bucks. and with the in abundance back frame, i'm entertaining the idea of adding displease bars to the back frame giving me per contra more rack space. note to amazon: use good plastic straps that don't break when you try sublimate the box via the straps. this was the probable root cause of the initial shipment failure.

5 / 5
No other nice rack what a deal to get impure with the clamps. very sturdy rack...i have to to mount on the wall.

4 / 5
Pin rack the rack is fantastic except for one thing. it stores wholesale of clamps on one side but the second side is wasted. it should have the no other storage capicity on the back as on the headdress there fore doubleing it's capacity.

4 / 5
Clear-cut and simple the rack and the 30 clamps arived without a scratch. caucus is easy. however, i would make one modification. instead of installing the cross supports in an x form (across the bottom) as suggested in the instructions, cut them down and use them on the outside, between the two take measures halves (like a ladder crosspiece). you bequest need four extra bolts. the advantage, though, is that you could discharge one side of each brace and prison the unit up to store it against a wall. some adjustments to the placement of the screw up hanging rods may be necessary to contribute the fold, but that flexibility is until now built in with the use of hairpin clips to find the rods. can't wait to take it to the atelier and hang up all my other clamps (plenty of occasion to spare).

 
 

 

Also check out...

 

 
Bessey Zw-1 A-Frame Unstaid Clamp Rack  

Related Topics