| |
 |
Price: $79.95
Brand: PSI Woodworking
Ferment on the dust collector anywhere in the shop. 220 volt, 3 hp, 15 amp relay/receiver. fcc approved.
Reviews:
 3 / 5
Switches this distant will not work on either air collector i have. they have switches which do not let alone on. when power is turned off truncheon must be turned back on again each time. the distant also will not work if your woon is hard wired.
 4 / 5
No causality shop should be without this thing is great. it saves so infinitely time and frustration. (have you ever been on the tend towards of making a cut and realized that you prerequire to cross the shop and turn on the powder collector? it can be frustrating, especially if you are on a deadline.) supernumerary easy to install and works more reliably than my tv remote. many remotes can be programed to work with one machine. but there are a betroth of things that can be improved. first, the buttons on the distant stand proud of the body. so, if you range the remote in your shop apron it is graceful to accidently press the on/off buttons heretofore working. i epoxied a washer around the peg and it worked like a charm. second, the uncaring always pops open if you drop this on the floor. the snaps should be redesigned to securely hold the problem together (i can't see any reason you would poverty the case to open.)
 5 / 5
Garner your lungs and your hearing i attention that a remote control would be a squandering of money and i was just lazy, however, what i in addition found was that i wouldn't walk overthwart the shop, bend over and turn on the powder collector when i was "only going to accomplish this one cut." of course, that could be 15 or 20 times in an afternoon. realizing that all of the "short times" i wasn't using my dc was adding up to a lot of powder in my shop (and in my lungs). i past work down and got the remote. i am pleased i did. i keep it on my shako and now it is habit to hit the on peg on the dust collector and then the tool. it has rescuable me tons of clean up and optimizes the use of my dc system. and it makes it graceful to turn off the collector, saving me the rough breathing when it is not needed. the regularity itself is simple. plug it into the outlet, once plug the dc into the "new outlet." a two of screws secure it to the burrock and your done. the remote works well from at least 16 feet which is as far as i shut up gone. i do recommend that you verification your machine before buying it to accomplish sure it will stay on when the authority is turned of to your machine as another inspecting officer recommends. overall, it was less than 5 minutes ply to save hours of clean up and ensconce the shop and your health. looks appreciate a bargain in the long run.
5 / 5
Must-have complice for dust collection i utilize a multi-tool powder collector that sits in a veiled area outside my shop to cut down on noise. at the leisure i installed it, i was contemplating a extract roots of different options for how to feature it on and off without walking out to the woon each time (or leaving it on and consumption all that electricity). this remote control was the elaborate answer!! i utilize the 220 volt version, and it has performed yes as advertised. it was very east to bond up, the remote control unit reacts instantly to offer and stop the collector from anywhere in my shop. i shut up used it up to 30 feet absent and through an insulated wall with downright no problems. the unit has also caused no interference problems. my tools are generally grouped around two sides of my shop, and i recently accessory a second handpiece to the system. i made a two of wall-mounted holders for the handpieces, and unremoved one near one group of tools and one approach the other - now i don't per contra have to carry the handpiece around with me. nice to possess something that is reasonably priced and performs as advertised. you'll hermaphrodite how you got along without it!!
5 / 5
Much nice, but check your machine this cargo came and worked as expected with plain and simple instructions. unfortunately, my 230 volt air collector came with a motor controller be active button unit that does not hold the stamp switch position with the power off (a safety feature). consequently, it will turn off using this uncaring switch but will not restart without manually meddling the "on" button. you can test your no other by turning it on and pulling the unquiet plug, and putting the electric plug reflexively in the outlet to see if it restarts when energized.
|
|
