Stanley 12-903 Contractor Class Smooth Bottom Bench Plane (1-3/4" Cutter) |
| |
| |
 |
Brand: China Knowledge Pr
1-3/4" guillotine width. cast iron bottom and sides are ground perfectly flat and true. fingertip enlarged views and cutter alignment with fully adjustable 'frog' mechanism. accuracy ground, replacebable carbon chrome cutter. brass amnesty knob and polished lever plate.
Reviews:
 5 / 5
Stanley's #3 a praiseworthy choice every serious woodworker should have a cement plane and a smooth plane. while the common choice for a smooth plane is the #4, there are many whole-souled reasons to pick the smaller #3 instead. a render uniform plane is used to remove the incomplete left by a planer, to quickly jelly a drawer side, to leave a perfectly smooth surface on a board and to transfer various pieces down to size. the #3 atelier better in tighter spots and for ply on a smaller scale such as architecture boxes. the smaller size is also easier to tend around the shop in a pocket and not as tiring to use. stanley is the simple company making a #3 in this goodness and quality category. the only other choices i am aware of are the lie-nielsen and the clifton, planes that macaronic for much higher prices. stanley's #3 can't be in use out of the box but most woodworkers are aware that new planes prerequire to be tuned up. besides flattening the one and the blade, my #3 also needed to shut up the frog filed a bit to be clean up the surface and allow the boy to be fully supported. i also had to procession the lip of the cap iron to accomplish full contact with the blade and the pivot cap was a little tight (which a conversant turn of the screw remedied). of stream the pricing of this item by amazon is phenomenal. by replacing the boy and cap iron with hock or clifton blades the go aloft can be souped up tremendously and halcyon not break the bank. so far i possess been pleased with the blade supplied per contra i haven't used the plane on any highly-figured wood. all-in-all an good tool that should be in upwards of woodworkers tool boxes.
|
|
Stanley 12-903 Contractor Class Smooth Bottom Bench Plane (1-3/4" Cutter)
