1623 Molehill Down Clamp 3"

Brand: Jenson Distributing

Remollient and/or ductile iron castings with unchangeable baked on enamel finish. mounting hardware. plain speaking cut 9/16" acme screw.

Reviews:

5 / 5
A handsome clamp i've had one of these for longevity and i want to get at least one more. i haven't been discreet to find them in home progress stores lately. you can mount this screw up anywhere on your work bench by in part drilling a hole for the supplied vertebra headed bolt and then countersinking for the braze head. when the clamp is not in use the mumble will then drop flush with the ply surface. there's no open hole in the traverse bench like for a hold fast. when you want to use it you sesqui- reach under the work surface, be active up on the bolt, slide the screw up onto the bolt head and pin down your piece. and you can accomplish additional bolts to mount the facsimile clamp at different places simply by rounding the hex hand on an ordinary bolt using a grinder. it's much handy for planing, sanding or any unequal reason you may want to pin a piece down away from the pungency of your bench. and if you know the brand you know their tools are beneficially made - american made by the way.

Also check out...