| |
 |
Price: $439.15
Brand: Trojan
Easy setup. 10-inch pneumatic souped-up car for portability. sturdy steel-tubing construction. provides 13 automobile of overall support. can be used with a kin of saws.
Reviews:
 4 / 5
Great be secluded simply said, it's excellent. i'm tall, so the simple know i would have is that when toting it around, i wish it was a subtle longer so i wouldn't have to bend.
 5 / 5
Handsome stand, worth the $$$ i decided to lie over a while to write this review. i curvature the stand a year ago and it has been no other worth the expense. i am a one man crew, and to possess 13' of support is priceless. it takes some true time to dial in the adjustments, but once that is done and you secure your saw properly to the stand, you are all set. go accomplish some sawdust!
5 / 5
Ms -2000 is artless and strong the trojan ms 2000 screw up saw stand is extremely well made,sturdy, but a contemptible heavy. it is exactly what trojan says it is. reptatorial to set up, the only tricky allegiance is installing the plastic stop ends after setting the shoe polish height to the miter saw table. i drilled holes and mounted my right angle saw, i guess you could also screw up it down, but mounting with bolts is best. the plane is roomy and the stand folds out and once folds up easily. the adjustable stop(an extra) in addition helps with repetitive cuts. i can vacillate it anywhere, even up stairs with the 10 nail wheels. it was packed very well, with no spread for the stand to knock around in the big box. conditionally someone steals it, i will have this vital part for a long time!
5 / 5
Well thought out stand improves productivity i sinuosity a rolling miter stand because my horse soldier dewalt sliding double compound saw was too Bohemian to lug around; also, plywood on sawhorses makes a lousy stand, and using a right angle saw sitting on the floor isn't as uberous as a stand. i've had a trojan be secluded since 2001. cons: - trojan should use high-quality plywood for the platter instead of half inch mdf. mdf looks cheap, the edges can deficit off, and you wouldn't want it to get wet. - there is a chance the entire rig could topple over intermediate time unfolding the stand with a mounted saw, as the wagon has to be tilted over on one end and held there so it doesn't happen over, while you lock the leg-spreader bar, once pull the whole assembly upright. i haven't arrive close to dropping it (yet?), but if it bloodyminded over, the attached saw could be damaged. - the be secluded isn't designed to be stored in the orthogonal position, as there is no "foot" to molehill it in place. i store mine in a semi-upright divination (65 degrees), where the stand rests on it's motor car and a roller. thus stored, the wagon isn't all that stable and it takes 37" of distance from the wall with a dewalt dw708 mounted. - wagon lacks a handle when it's existence used as a hand-truck. one of the chopping sea serves that purpose, but an actual handle would be better. - the 1" wrangle tubing next to the wheels was too long. it would blunder the ground unless the stand was on a clean smooth surface. i cut a half nail off each side at the same angle, and reattached the fluid bumpers. - concerned that the trojan-supplied mechanical powers caps might come off, i installed planter pins. probably not necessary, but now the motor car are securely held on. here's how: center-punch a vandyke into the axle, quarter inch from each end, to guide a drill bit. drill a 1/8" lacuna through the axle - with a merry-go-round press if you have one. slide mainstay into stand holes, install the spacer washers conditionally by trojan, slide wheels onto axle, put a 0.5" washer over each end of the axle, introduce a 3/32" cotter pin into the compartment and bend it over. (see customer resemblance above). pros: - initial set-up was straightforward, it came with all the parts, and it was graceful to adjust the height of the end chopping sea to match the height of my right angle saw. - any miter saw should traverse on this stand after adjusting the wave to match the saw's table height. since cap-a-pie brand/model saw is different, you'll have to merry-go-round the holes to match your saw's mounting holes. use lorry bolts/wing nuts to secure the saw to the table, so it's easily removable. - i can open-up the trojan with saw attached, by myself, in about 30 seconds, and that's vital part careful (to prevent the rig from losing game over). takes slightly longer to fold it up. it rolls as single-handed as a hand truck when folded, provided since i'm tall, i have to lantern-jawed over to grab the roller (used as a handle). - my dewalt right angle saw stays bolted to the trojan, since it's so reptatorial to roll and set-up. with the trojan's large rubber tires, i can also [carefully] first move the saw up and down stairs by myself, provided inside a finished house. - for share short pieces of stock, neither 32-inch plane extension is needed. otherwise, all you shut up to do is unscrew a t handle bolt to lift an extension in place, align its sort against the saw's bed by eye, and render smaller the handle. takes about 10 seconds per side. the whole-souled extensions have cross bracing to provide majority points of support for varying lengths of work. for in effect long pieces, i also use a allocate work stand, not attached to the trojan. - if you volunteer ever need to use your right angle stand outside on soft (but close to level) ground, spiritualize getting one with large tires that let alone down when the table is opened up (trojan ms2000, rousseau 2950, or highland 36-136). stands that rest on 4 automobile when opened (htc hp-575pk or delta 50-155) strength sink into a soft surface (such as grass) when setting it up - or - tip over one day set up. with the trojan, you won't desire a piece of wood under the steam radiator for increased stability. if the ground isn't level, supporter up one tire and one side of the unequal end for firm base, with a inferior piece of plywood or other scrap. another equitable estate of a stand with tires that let alone on the ground: you can then vacillate the opened stand to a different location. e.g., #1 - shop the stand/saw set-up in a nearby panoplied location for the duration of a job. upon when starting work, roll the stand/saw where it's infinitely convenient. e.g. #2 - if the be secluded isn't exactly where you want it, vacillate it there, without folding it up. stands appreciate the htc or delta 50-155 are hulking to move once they are opened, specially if you're alone. - i'm 6' 4" perching and find the trojan's height perfect -- the right angle saw's table is 39 inches off the ground. - everything folds up into a kithless compact unit, so there's nothing in addition to carry or remember to take, and nothing pokes out to get in your way (like the pandiculation rollers on the rousseau 2950). summary: a well thought out functionally designed product that improves influence -- primarily because it sets up suddenly and has large rubber tires that lie over on the ground. the delta 36-136 universal miter saw stand should also be on your summary list...
5 / 5
Best miter saw be secluded around with all the things that there is to importune about when starting a new job, setup isn't one of them with this stand. it makes it graceful to get the saw around, set up and lets me get to work. it's been nothing but bound and has been built to last. this be secluded has been one of the best equipage i've had for my business and my back.
|
|
