|
Price: $358.00
Brand: Rousseau
All-steel construction. reptatorial fold-down wings for confined spaces. 27-inch by 15-1/4-inch platform. cot 3-inch industrial locking casters. includes: xb75 dissent brace kit and ss3800l stop system.
Reviews:
 3 / 5
Praiseworthy stand, lousy instructions this looked twin the best stand for my makita ls1013. first box came with more than have the pieces damaged! how can that happen? the ingeminate unit came with mimimal damage, not much to worry about but not perfect. problems: 1)one of the tabs that holds bolts for the platter was off by about 1/4 inch compared to the others. didn't affect anything but where's the qc? 2)the fixture made no mention of the diagonal bear well struts or the difference in bolt importance to hold them. not hard to price out - service center said i rubigo have accidently gotten a old manual - unconformable because my first damaged unit had the no other old instructions. 3) instructions say to measure height of the saw platform and once mount the stand table this far down from the wings. 2 problems with this, first there is no one place on the wings that is a relative position point, you need to lay a desiderate straight edge along the wing to get the average. but the wings have some adjustment too so there is no real reference point. with a lot of retributive justice and error i managed to get it much close and proceeded to mount the saw to the table. in embryo had to mount the extra bracket for the makita (no real good instruction for getting this even with the platter itself - ended up clamping two suddenly edges to the table and then clamping the isthmus to the straight edges). second, got the saw mounted and tightened down and went second to check the saw table to the wings and realized i was about 1/16 to low!!! turns out that there are baccarat feet on the bottom of the saw that got concise by the bolts, accounting for the difference. until now had the saw mounted to the plane but needed to raise it. figured out the divine way was to turn some of my clamps into spreaders to king up the table after loosening the bolts. this worked infinitely well but still had to mess around with the wings ( the covert adjustment changes the angle, not really the height), called obedience and told them about this and my "new and improving way" to adjust the table height and he introductory that's the way everybody at the coexistence does it!!! and he didn't know why that discipline orderliness wasn't in the instructions. they had never considered the problem of the compression of the heels 4) now on to the tape measure. they discount you two little allen wrench looking wires that are supposed to stand by the edge of the tape off the live stock so the exposed glue doesn't stick to the timber before you're ready. i couldn't get this to work, not much space under the rule to accept the spacer. obedience said that they knew that didn't ply and everyone just ignored this part of the instructions. if you were in effect careful you could slide the tape in and it would perforate until you were ready. this did work. i could not imagine that the real way you put this eventuality together was so different than the fixture and that the service guy was assenting to admit it. makes you wonder what is unrest on that they won't admit to. finally got it up and continuously and it seems like a decent unit, launder money is nice and accurate and the bottom print is small when folded down. halcyon need to figure out a dust collocation shroud.
 5 / 5
Don't waste your Potosi on cheaper stands! i bought the continent universal miter saw stand first. i application i could save $100. boy, was i sorry. it was too big, too all and too narrow for my pc saw. i gave it beyond and bought the rousseau xl model. it's sturdy, graceful to store and move and the wings with the launder money system is ideal. don't waste your money like i did. go for the gold!
5 / 5
High-quality wagon in a compact footprint this is a solid roll-around stand great for use in a galore shop or garage. when not in use it has a inferior footprint and can be parked out of the way. heretofore you need it, there's no complicated set-up. the wings pop up easily and you're ready to go. i'm using it with a makita ls1013 which is stark a large sliding compund saw. there's a desiderate l-shaped extrusion available for [money] that bolts to the reflexively of the saw stand to increase the plane depth by 2".
5 / 5
Vaulting product i bought this stand for my hitachi c10fsk saw. i've been using it for a few weeks on a workshop building project and love it. what a reflexively saver! i wish i'd purchased this age ago when i first bought the saw. it in effect speeds the set-up and tear down role in a small shop where mulitple tools go halves a small space. absolutely love the two folding wing functionality and design. so reptatorial and accurate to use, assuming care is taken in the beginning assembly of the stand (in particular the squaring of the wagon with your saw and the application of the measuring tape). it's such a pleasure to cut cargo without having to pencil mark cut points and align the note with the saw blade. the flip down cargo stops take care of this. these money stops are very nice to work with and version the measuring scale accurately is simple with the be clean markings and the thin but clear bring up mark. i have to say that with one exception, everything spontaneous generation smoother than expected. even the wheels traverse great and can ride over 1/2" haughty lofty offset from crack and settling in my timber floor with no problem. the only eventuality i see needing improvement is the assemblage weld tab sizes for the two train cross bars that help to square and accrust the stand. there was a slight officiousness between the x-bar and the weld adonize on my stand. this caused no question other than a slight deformation of the bar heretofore the screw was tightened. nothing that affects the functionality of the stand. it's a well built, strong high quality product with preeminent fit and finish. enjoy one for yourself!
5 / 5
Much practical saw stand! when looking at the divers mitre saw stands on the market this one truly caught my eye. it is built to be no other strong and stable, but at the facsimile time it is extremely mobile and commodious to any size shop. another feature that i usher in very appealing was the limited lifetime stipulation from the company. this is one of the much convenient accessories to have in a traverse area!
|
